CAS-3000S

  • Print
Details
Category: Aging & Sorting Machine
Created on Wednesday, 24 August 2011 20:22
Written by Samhwa
Hits: 7549

cas3000s 
cas3000sdraw 

SPECIFICATION
   CAS 3000S - Specifications * S : Single aging type (Attached PTD - for high voltage)
ITEM Standard Specification
  CAPACITOR SIZES  

Diameter
Length

1) Φ10 - Φ12.5

1) 12.5 - 25mm

2) Φ12.5 - Φ16

2) 20 - 36mm

+CP Lead : 20-30mm -CP Lead : 15-25mm 
* +,- Lead Deflection : Must be more than 5mm
  AGING TIME   60/ 80/ 100/ 120min
  PRODUCTION RATE   65pcs/min
  AGING TEMPERATURE   85 - 105°C ±10°C
  AGING POWER SUPPLY   DC3 - 600V (3A, 3A, 3A, 3A, 2A, 2A)
  JIG RESISTANCE   350V 120Ω(LOW Voltage), 600V 250Ω(High Voltage)
  JIG QUANTITY   240pcs (19pcs/JIG)
  TEST ITEM  

OP-SH : DC3V - 75V Free Setting 
LC : 4µA/ 40µA / 400µA / 4mA - 4Ranges 
CX : 0.2㎌/ 2㎌/ 20㎌/ 200㎌/ 2mF / 20mF - 6Ranges 
DX : 0.1% - 99.9% (50Hz or 60Hz)
  SORTING PROGRAM   GOOD, OP, SH, LC, CX, DX, TOTAL
  ADDITIONAL FUNCTION  

1)Lead Straightening 
2)Polarity Alignment 
3)Lot Change 
4)JIG Inspection
5)Sub Start Switch
6)1000H Timer(Heating)
7)Manual Measurement of LC, CX and DX
  AIR REQUIREMENT   4.5Kgf/cm2     50 ℓ/min
  POWER SUPPLY   1)Driving Unit : AC 220V ± 20V 3Phases 28KW 50Hz or 60Hz 
2)Testing Unit : AC 110V ± 10V 1Phase 2.5KW 50Hz or 60Hz
  MACHINE DIMENSION   3900(W) x 2600(D) x 1650(H)     W = 2900Kg
  OPTIONAL FUNCTION  

1) Lifter Type Hopper 
2) Agming power supply (150V, 250V, 350V, 500V, 600V)
3) ESR Sroting

 

INTRODUCTION
This machine is for single-ended electrolytic-capacitors. Feeding, loading, aging, testing and sorting are done fully automatically. Applicable capacitor sizes are Φ10 through Φ16. The sorting speed is 1sec. per piece and can be used in combination with a taping machine.