CAS-4500S

CAS-4500S

cas4500sdraw 

SPECIFICATION
   CAS 4500S - Specifications * S : Single aging type (Attached PTD - for high voltage)
ITEM Standard Specification
  CAPACITOR SIZES  

Diameter
Length

Φ16 - Φ20

25 - 42mm

+CP Lead : 20-30mm   -CP Lead : 15-25mm 
* +,- Lead Deflection : Must be more than 5mm
  AGING TIME   80/ 100/ 120 140min
  PRODUCTION RATE   45pcs/min
  AGING TEMPERATURE   85 - 105°C ±10°C
  AGING POWER SUPPLY   DC3 - 600V (3A, 3A, 3A, 3A, 3A, 2A, 2A)
  JIG RESISTANCE  

500Ω
  JIG QUANTITY   288pcs (15pcs/JIG)
  TEST ITEM  

OP-SH : DC3V - 75V Free Setting 
LC : 4µA/ 40µA / 400µA / 4mA - 4Ranges 
CX : 0.2㎌/ 2㎌/ 20㎌/ 200㎌/ 2mF / 20mF - 6Ranges 
DX : 0.1% - 99.9% (50Hz or 60Hz)
  SORTING PROGRAM   GOOD, OP, SH, LC, CX, DX, TOTAL
  ADDITIONAL FUNCTION  

1)Lead Straightening 
2)Polarity Alignment 
3)Lot Change 
4)JIG Inspection
5)Sub Start Switch
6)1000H Timer(Heating)
7)Manual Measurement of LC, CX and DX
  AIR REQUIREMENT   4.5Kgf/cm2     50 ℓ/min
  POWER SUPPLY   1)Driving Unit : AC 220V ± 20V 3Phases 28KW 50Hz or 60Hz 
2)Testing Unit : AC 110V ± 10V 1Phase 2.5KW 50Hz or 60Hz
  MACHINE DIMENSION   4990(W) x 2840(D) x 1800(H)     W = 3500Kg
  OPTIONAL FUNCTION  

1) Lifter Type Hopper 
2) Agming power supply (150V, 250V, 350V, 500V, 600V)
3) ESR Sroting

 

INTRODUCTION
This machine is for single-ended electrolytic-capacitors. Feeding, loading, aging, testing and sorting are done fully automatically. Applicable capacitor sizes are Φ16 through Φ18. The sorting speed is 1.33sec. per piece and can be used in combination with a taping machine.