CAS-5000S

cas5000s 
cas5000sdraw 

SPECIFICATION
   CAS 5000S - Specifications * S : Single aging type (Attached PTD - for high voltage)
ITEM Standard Specification
  CAPACITOR SIZES  

Diameter
Length

Φ18 - Φ20

Φ22 - Φ25

25 - 46mm

+CP Lead : 20-30mm   -CP Lead : 15-25mm 
* +,- Lead Deflection : Must be more than 5mm
  AGING TIME   100/ 120/ 140/ 160min
  PRODUCTION RATE   40pcs/min
  AGING TEMPERATURE   85 - 105°C ±10°C
  AGING POWER SUPPLY   DC3 - 600V (3A, 3A, 3A, 3A, 3A, 2A, 2A)
  JIG RESISTANCE  

350V 120Ω(LOW Voltage),  600V 500Ω(HIGH Voltage)
  JIG QUANTITY   288pcs (13pcs/JIG)
  TEST ITEM  

OP-SH : DC3V - 75V Free Setting 
LC : 4µA/ 40µA / 400µA / 4mA - 4Ranges 
CX : 0.2㎌/ 2㎌/ 20㎌/ 200㎌/ 2mF / 20mF - 6Ranges 
DX : 0.1% - 99.9% (50Hz or 60Hz)
  SORTING PROGRAM   GOOD, OP, SH, LC, CX, DX, TOTAL
  ADDITIONAL FUNCTION  

1)Lead Straightening 
2)Polarity Alignment 
3)Lot Change 
4)JIG Inspection
5)Sub Start Switch
6)1000H Timer(Heating)
7)Manual Measurement of LC, CX and DX
  AIR REQUIREMENT   4.5Kgf/cm2     50 ℓ/min
  POWER SUPPLY   1)Driving Unit : AC 220V ± 20V 3Phases 28KW 50Hz or 60Hz 
2)Testing Unit : AC 110V ± 10V 1Phase 2.5KW 50Hz or 60Hz
  MACHINE DIMENSION   4990(W) x 3080(D) x 1800(H)     W = 3500Kg
  OPTIONAL FUNCTION  

1) Lifter Type Hopper 
2) Agming power supply (150V, 250V, 350V, 500V, 600V)
3) ESR Sroting

 

INTRODUCTION
This machine is for single-ended electrolytic-capacitors. Feeding, loading, aging, testing and sorting are done fully automatically. Applicable capacitor sizes are Φ16 through Φ18. The sorting speed is 1.33sec. per piece and can be used in combination with a taping machine.