CAS-2300SP

cas2300sp 
cas2300spdraw 

SPECIFICATION
   CAS 2300SP - Specifications
ITEM Standard Specification
  CAPACITOR SIZES  

Diameter
Length

Φ4 - Φ10

5 - 12.5mm
+CP Lead : 20-30mm -CP Lead : 15-25mm 
* +,- Lead Deflection : More than 5mm
  AGING TIME   90/ 120/ 150/ 180 min
  PRODUCTION RATE   75 ~ 114pcs/min (Inverter Control)
  AGING TEMPERATURE   125°C ± 10°C
  AGING POWER SUPPLY   DC3 ~ 150V (5A, 3A, 3A, 3A, 2A, 2A)
  JIG RESISTANCE   120Ω  / 120W 
  JIG QUANTITY   240pcs
  TEST ITEM  

OP-SH : DC3V - 75V Free Setting 
LC1 : 2µA/ 20µA/ 200µA/ 2mA - 4Ranges 
LC2 : 4µA/ 40µA/ 400µA/ 4mA - 4Ranges 
CX : 0.2㎌/ 2㎌/ 20㎌/ 200㎌/ 2mF - 5Ranges 
DX : 0.1% - 99.9% (50Hz or 60Hz)
  SORTING PROGRAM   GOOD, OP, SH, LC1, LC2, CX, DX, TOTAL
  ADDITIONAL FUNCTION  

1Lead Straightening
2)Polarity Alignment
3)Lot Change 
4)JIG Inspection
5)Sub Start Switch
6)1000H Timer (Heating)
7)Manual Measurement of LC, CX and DX
  AIR REQUIREMENT  

4.5Kgf/cm2 50ℓ/min
  POWER SUPPLY   1)Driving Unit : AC 220V ± 20V 3Phases 20KW 50Hz or 60Hz 
2)Testing Unit : AC 110V ± 10V 1Phase 2.5KW 50Hz or 60Hz
  MACHINE DIMENSION   3900(W) x 3030(D) x 1650(H) W=2800Kg
  OPTIONAL FUNCTION  

1)JIG Check
2)ESR Sorting

 

INTRODUCTION

This machine is for single-ended electrolytic-capacitors. Feeding, loading, aging, testing and sorting are done fully automatically. Applicable capacitor sizes are Φ4 through Φ10. The sorting speed is 0.7sec. per piece and can be used in combination with a taping machine.